64 Cavities Pet Preform Mould

Basic Info.

Model NO.	64
HS	8480719090
Warranty	1 Year
Shaping Mode	Injection Mould
Runner System	Hot Runner
Neck Size	30/25
Transport Package	Wooden Container
Specification	64 Cavities
Trademark	ZS
Origin	China

Product Description

Neck size: 30/25
Weight: 13.8G
Match machine: General Pet Injection Molding Machine
The whole mould has a tight and precise structure. Each mould which has been processed by ion nitriding can remain the outlook after processing for long time. The mould material is S136. The internal stress of mould is totally eliminated. The mould is remained at about 500ºC in the vacuum condition for 36 hours and then to be cooling down slowly after get out of the furnace to be processed. It can used for long time without transformed or twisted which can lead to unstable effect during the use. The mould frame is used to install all the mould for one time to ensure that the shaping cavity and the leading pole case remained at the same column. The precision of the whole set mould frame is at a high level. We use HUSKY mechanic outside sliding close mould in the material of S136 high intensity anti-corrosion steel. The structure is reliable. The movement of open/close mould (slide,push,lift out) is coordinated. All contacting surface of the sliding parts are processed by advanced ion nitriding treatment. The surface intensity can reach HRC65-70. It has low coefficient of friction to reach wear resistance capability. The material of injection core, injection cavity, mould lip is S136 steel with HRC higher than 48.The material of hot flowing channel is SKD61 which has high intensity and hot resistance. Its HRC is higher than 30. The heating pipe of the main flowing channel is used of Italian HAFSHOF pipe. The pipe join is embedded. The heating mouth is made from joint venture company. The quality can be guaranteed. It is in HUSKY structure with direct injection mold. The flowing channel is fluent and the coordinate surface with valve needle is smooth. The precision of cavity is at high level of less than 0.004mm with the surface intensity at between HRC 68 to 72. The material of heating mouth is beryllium copper with HRC higher than 35. The injection port of the heating front use DUPONT VESPEL SP-1 PI bar which is quality guaranteed for long time. The valve needle is made of imported original needle with material of SKD 61, HRC 60-65. Its surface has been processed by special treatment and have the ability of high precision and wear resistance. The imported wear resistance ring is used between piston and cylinder.

Part name		Material
Cold mould parts:
1	Mould core	S136 forging part
2	Mould cavity	S136 forging part
3	Mould lip	S136 forging part
4	Water core	304 stainless steel
5	Mould core plate	4Cr13
6	Mould cavity plate	4Cr13
7	Mould lip plate	4Cr13
8	Slide block plate	4Cr13
9	Mould open switch	4Cr13
Hot mould parts:
1	Hot flowing channel plate	4Cr13
2	Hot flowing channel holding plate	4Cr13
3	Cylinder plate	4Cr13
4	Lift plate	4Cr13

COOPERATION PARTNER

PACKING&SHIPMENT